FSH Compression and Tension type Loadcell

Features:

FSH Mine Type Loadcell is manufactured using special alloy steels, optional stainless steel versions can also be produced.
Alloy steel models are hardened by heat treatment and after cleaning with sandblasting method, all surfaces are homogeneously coated with Nickel and become more resistant to corrosion.
FSH Mine Type Loadcells are manufactured using shear type straingages, and while 4 straingages are used in normal loadcells, this number can increase to 8 or 16 in FSH models, for this reason, since strain signals are received from different points, they give more linear output and become suitable for use in force testing machines.
All Loadcells are tested in accordance with the test procedures specified in OIML R60 recommendations.
FSH Mine Type Loadcell is used in industrial areas such as force testing machines, silo and tank weighing etc.
More reliable and accurate weighing results are obtained with specially produced mounting kits for silo and tank weighing.
Due to the low height of the FSH, it is suitable for measurements in confined spaces.
The measurement area is made resistant to all kinds of adverse environmental conditions by welding with stainless steel covers, dust and water protection level is IP67 class (EN 60529)
FSH Mine Type Loadcell has more strain gauges than normal load cells with its arm type structure, so it is more sensitive and highly resistant to lateral loads.